 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) RF1419D 403.5 MHz SAW Filter * * * Medical Band (402-405 MHz) Front-End Filter Low-Loss, Coupled-Resonator (Lithium Tantalate) LiTa03 Design Complies with Directive 2002/95/EC (RoHS)10 Pb The RF1419D is a surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in the 402-405 MHz band. This filter is ideal for short range wireless medical data applications where small size and low power consumption are required features. Receiver designs using this filter include superhet, direct conversion or superregen. RFM's advanced SAW design and fabrication technology is utilized to achieve high performance and optimum loss with simple external impedance matching. SM3838-8 Case 3.8 x 3.8 Electrical Characteristics Characteristic Center Frequency at 25C Insertion Loss Passband Ripple (Relative to ILMIN) 402-405 MHz 3 dB Bandwidth Rejection Attenuation: (relative to ILmin) 358.5 MHz 358.5 - 384 MHz 415 - 423 MHz 423 - 503 MHz Temperature Frequency Aging Impedance Match Standard Reel Quantity Freq. Temp. Coefficient Absolute Value during the First Year Input/Output Reel Size 7 Inch Reel Size 13 Inch FTC |fA| 5 1 560 // YWWS 9 500 Pieces/Reel 3000 Pieces/Reel 1, 3 BW3 Absolute Frequency Sym fc ILMIN Notes 1, 2, 3 1, 3 1, 3 1, 3 3.0 40 35 25 40 Minimum Typical 403.5 1.60 1.10 7.5 65 50 35 50 -37 10 50 Ohms ppm/k ppm/yr dB 2.5 1.25 Maximum Units MHz dB dB MHz Lid Symbolization (Y=year WW=week S=shift) CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. 1. 2. 3. 4. 5. 6. 7. 8. 9. Notes: Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 test system. The frequency fc is defined as the midpoint between the 3dB frequencies. Where noted specifications apply over the entire specified operating temperature range of -10C to +60C. Frequency aging is the change in fc with time and is specified at +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years. The design, manufacturing process, and specifications of this device are subject to change. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Tape and Reel Standard Per ANSI / EIA 481. This product complies with Directive 2002/95/EC of the European Parlament and of the Council of 27 January 2003 on the restriction of the use of certain hazadous substances in electrical and electronic equipment. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com RF1419D-052907 Page 1 of 3 403.5 MHz Absolute Maximum Ratings Rating Input Power Level DC Voltage Storage Temperature Soldering Temperature SAW Filter Value 10 3 -40 to +85 (10 seconds / 5 cycles max.) 260 Units dBm VDC C C Electrical Connections Pin 1 2 3 4 5 6 7 8 Connection Ground Input Ground B 8 C E 8 H7 6 5 4 D F YWWS Ground Ground Output Ground Ground A 1 2 3 7 6 5 1 2 3 G 560 4 Matching Circuit to 50 Case Dimensions 7 Output 1 8 4 2 3 Input Dimension 50 6 5 50 A B C D E F G H Min 3.6 3.6 1.00 0.95 0.90 0.50 2.39 1.40 mm Nom 3.8 3.8 1.20 1.10 1.0 0.6 2.54 1.50 Max 4.0 4.0 1.40 1.25 1.10 0.70 2.69 1.60 Min 0.14 0.14 0.04 0.037 0.035 0.020 0.090 0.055 Inches Nom 0.15 0.15 0.05 0.043 0.04 0.024 0.100 0.06 Max 0.16 0.16 0.055 0.05 0.043 0.028 0.110 0.065 RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com RF1419D-052907 Page 2 of 3 403.5 MHz SAW Filter CH1 S 21 log MAG 3 dB/ 1 REF -10 dB 2 15 Aug 2005 09:03:19 1_: 0 dB 0.000 000 MHz RF1419D DEMO1 UNTUNED PRm Cor 3 Max 4 BW: 7.364 203 MHz cent: 403.558033 MHz Q: 54.8 1_ loss: -1.5722 dB REF=1 CH1 CENTER 403.500 000 MHz CH2 S 21 log MAG 10 dB/ REF -20 dB SPAN 30.000 000 MHz 4_ -66.509 dB 448.500 000 MHz PRm Cor 1_ -69.28 dB 358.5 MHz 2_ -71.176 dB 383.5 MHz 3_ -69.997 dB 423.5 MHz 4 CH2 CENTER 403.500 000 MHz 1 2 SPAN 90.000 000 MHz 3 RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com RF1419D-052907 Page 3 of 3 |
Price & Availability of RF1419D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |